n ordering information ny p C 12 w C k [example] (a) (b) (*) (c) (d) (e) n features l ultra slim type with 5 mm thickness good for high density mounting l low power consumption and high sensitivity nominal coil power: 120 mw operating power: 54 mw l ul, csa, vde recognized l conforms to iec 1010-1 and 1131-2 l wide operating range l sil pitch terminals l plastic sealed type l compatible with solid state i/o module type sn (see page 376) in size and pin (terminal) arrangement l environmentally friendly cadmium free contact type is available. l rohs compliant since date code: 0439c1 please see page 6 for more information (a) series name ny : ny series (b) terminal classifcation nil : pc board mounting type p : socket mounting type (c) nominal voltage refer to the coil data chart (d) contact w : bifurcated type (e) enclosure k : plastic sealed type note: actual marking omits the hyphen (-) of (*) n safety standard and file numbers ul508 (file no. e56140) c22.2 no. 14 (file no. lr35579) vde0435 (file no. 11039-4940-1013) please note that ul/csa ratings may differ from the standard ratings. ny series power relay 1 pole 5 a (cadmium free contacts type) 1 nominal voltage contact rating 1/8 hp 125 vac/250 vac 4.5 to 24 vdc 5 a 30 vdc/250 vac resistive pilot duty c 300 rohs compliant
2 ny series n specifications item ny contact arrangement 1 form a (spst-no) material gold overlay silver alloy style bifurcated resistance (initial) maximum 30 m? (at 1 a 6 vdc) rating (resistive) 3 a 250 vac or 3 a 30 vdc maximum carrying current 5 a maximum switching power 750 va, 90 w maximum switching voltage 270 vac, 125 vdc maximum switching current 5 a minimum switching load* 1 1ma 5 vdc coil nominal power (at 20c) 0.12w operate power (at 20c) 0.054 w operating temperature C40c to +90c (no frost) (refer to the characteristic data) time value operate (at nominal voltage) maximum 10 ms release (at nominal voltage) maximum 5 ms insulation resistance (at 500 vdc) minimum 1,000 m? dielectric between open contacts 750 vac 1 minute strength between coil and contacts 3,000 vac 1 minute surge strength 5,080 v (at 1.2 50 s) life mechanical 2 x 10 7 operations minimum electrical 1 10 5 operations minimum (at 3a 250vac, 30vdc) 1.5 10 5 operations minimum (at 3 a 120 vac) 5 10 4 operations minimum (at 5 a 250 vac) other vibration misoperation 10 to 55 hz (double amplitude of 1.5 mm) resistance endurance 10 to 55 hz (double amplitude of 5.0 mm) shock misoperation 100 m/s 2 (11 1 ms) resistance endurance 1,000 m/s 2 (6 1 ms) weight approximately 3.5 g * 1 minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
3 ny series nominal coil resistance must operate must release nominal model voltage (10%) voltage voltage power ny- 4.5 w-k 4.5 vdc 169 ? 3 vdc 0.45 vdc 120 mw ny- 5 w-k 5 vdc 208 ? 3.35 vdc 0.5 vdc 120 mw ny- 6 w-k 6 vdc 300 ? 4 vdc 0.6 vdc 120 mw ny- 9 w-k 9 vdc 675 ? 6 vdc 0.9 vdc 120 mw ny- 12 w-k 12 vdc 1,200 ? 8 vdc 1.2 vdc 120 mw ny- 18w-k 18 vdc 2,700 ? 12.1vdc 1.8 vdc 120 mw ny- 24 w-k 24 vdc 4,800 ? 16.1 vdc 2.4 vdc 120 mw n coil data chart n characteristic data note: all values in the table are measured at 20c 10 20 30 50 100 200 300 500 5 3 2 1 0.5 0.3 0.2 0.1 dc resistive load ac resistive load maximum switching power switching voltage (v) switching current (a)
4 ny series ny type n reference data n dimensions l dimensions l schematics (bottom view) l pc board mount - ing hole layout (bottom view) nyp type unit: mm 17.5 +0.08 +0.08 0.98 20.1 0.98 20.1
5 ny series n socket dimensions n socket drilling plant n notes 1. socket ordering code. jl-5n 2. standard ic socket is not recommended. please use socket jl-5n. unit: mm 24.5
6 ny series 1. general information l relays produced after the specifc date code that is indicated on each data sheet are lead-free now. most of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf) l lead free solder paste currently used in relays is sn-3.0ag-0.5cu. l all signal and most power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 5 hazardous materials that are restricted by rohs directive (lead, mercury, chromium iv, pbb, pbde). l it has been verifed that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid leaded relays (for lead-free sample, etc.) please consult with area sales offce. l we will ship leaded relays as long as the leaded relay inventory exists. note: cadmium was exempted from rohs on october 21, 2005. (amendment to directive 2002/95/ec) 2. recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu. rohs compliance and lead free relay information refow solder condtion 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. 4. tin whisker l dipped snagcu solder is known as low risk tin whisker. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condtion: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c soler bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec.
7 ny series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141 8630, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@fcl.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2006 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. june16/2006
|
